Easy Joint Paving Jointing Compound 12.5kg – Buff Sand

Product Information

I found that the shower or vertical setting on the hose nozzle works well with the installation of this product. When finishing the joints, a jointing tool may smooth out the surface of the joints to give a more pleasant look to the finish. The product should sit 1/8″ below the surface of the paver or bottom of the chamfer, whatever is lower. Since beginning our business, we have relied on polymeric sand as the product of choice for our jointing compound. It is not without its cons, but as long as you follow the directions carefully and the conditions are right, polymeric sand is a good option for paver joints. However, there are other choices that have their applications as well. In this article, we will be highlighting a semi-permeable jointing compound from Azpects called EASYJoint. Technically advanced: Years of research and continuous development of our jointing compound makes this a market leader. We sell tens of thousands of EASYJoint tubs every month throughout the UK and in Europe. Use a squeegee or soft bristle push broom to move the jointing compound around the surface and water to move the compound to the bottom of the paver joint.

In my experience, it is an easy installation that takes about twice the time than a typical polymeric sand installation. I was certainly happy with the installation and the permeability of the product, especially for open graded bases. In tighter joints, it requires more patience to get the grains into the joints and may require a compactor to be able to achieve this or a thin tool to push it into the joints. A lot of water is required in the installation of this product and it is much easier with two or more people. A squeegee and / or soft bristle broom is required.Similar to the above systems, paver base panels have drainage holes in them and when installed with High Performance Bedding below, this system allows water to flow through it and into the subgrade following a slope out of the system. • Early or Late in the Season

EASYJoint is the original sweep-in all-weather jointing compound and still the best truly "All Weather Paving Joint Compound". Do not be fooled by other paving jointing compounds making similar claims. Azpects sells tens of thousands of tubs of EASYJoint every month to satisfied customers all over the Europe and North America. Compact the pavers or slabs using a compactor with a protective pad to set them into the bedding layer prior to beginning the installation of the jointing compound.Driveway Jointing Mortar - High Strength Epoxy Resin Paving Grout - suitable for vehicle areas up 3.5 tonnes EASYJoint is the UK's top-selling paving jointing compound, favoured by professionals and DIY installers all around the world. This product was first developed in 2009 and has now evolved to meet user demands and keep up with the latest trends in the industry. The EASYJoint family now has 9 products within the range. Due to the structural requirements of a driveway and that generally, the bedding mix is stronger than that of a patio or path, the use of EASY Joint is not recommended.

Wet the paving, brush in the compound, then strike the joints for a smooth finish and stronger, durable joint.; EASYJoint is a very effective, super fast and aesthetically pleasing way to fill/complete joints between paving materials including slabs and pavers for example. Note: EASYJoint - for jointing paving - continues to harden for several weeks and achieves its full strength after approximately 1 month. Available in different colours, EasyJoint holds up well against weathering and is incredibly long-lasting on joints that are 3mm wide and over. Once opened, the remaining product can still be used, in turn reducing waste and making the most of your money.Polymeric sand cannot be installed in the rain. This is where this product shines. Early or late in the season, we see a lot of rain and colder temperatures making it extremely difficult to wrap up projects and get paid. However, this can be installed in these conditions allowing you to wrap projects up for your clients and get paid. The result of using EASYJoint, to joint your paving, will be a paving gap that is completely filled without the need for kneeling and compressing the material by hand that will last for years. A strong joint that will resist the elements and stand the test of time - better than traditional jointing methods. Smooth the joints: when drained and dried, lightly "point" or "strike" the joints with a suitable finishing tool Very fast to use: The use of water to wash and fill the joints between the paving is a breakthrough in jointing methodology. It assists the paving grout to compact into the joints so there is no need to 'strike' or 'tool' the joints unless you want a smooth finish.